Bird Houses       Martin Houses

Duncraft       The Bird Shed        Bird Baths       Garden Fountains       Outdoor Decor       Nature Shop      Garden      Find Books

  
Print Plans & Dimensions (below)
Model Not Yet Available.

Wren House by Duncraft 

 
Species Dimensions

House Wren

Bewick's Wren

Winter Wren

Brown Creeper

House Wrens, Winter Wrens, Bewicks Wrens & Brown Creepers
 

     Durable Rough-Cut Red Cedar

     Screw Assembly, Pre-Drilled Countersunk Pilot Holes

     Hinged Roof Secured with Shutter Hooks for Easy Access

     Corrosion Resistant Hardware

This nest box is constructed with Red Cedar.  Wood stock is rough-cut on both sides so birds can grip interior and exterior surfaces.

It has a 4" by 4" floor (inside dimensions), 8" floor to ceiling (inside front), 1 1/4" diameter entrance hole located 6" above the floor (to top of hole) and ventilation openings in the floor and under the roof.

Hinged roof provides easy access for monitoring and cleaning.  Shutter hooks secure roof in closed position.  Pilot holes in both primary and secondary work pieces makes for easy assembly with a screwdriver in minutes.

Mount on a tree, post, fence or wall between four and twelve feet high with partial sun and shade (see each particular bird species page for specific habitat and mounting instuctions.)

Remove the nest in late summer or fall after the brood rearing seasons are over.  Chickadees, Titmice and Nuthatches may use this nest box.

See assembly instructions and complete plans below.

More Birdhouse Plans

Assembly:

Safety First

Assemble woodworking projects in a safe area on a work bench at a height between waist and chest.

Wear eye protection.  Eye injuries are the most common assembly mishap.

Keep hardware and tools away from children and infants; store away when not in use.

1) Fasten Right Side to       2) Fasten Floor to Right                              3) Fasten Left Side                   4) Fasten Front.
    Back Panel with screws.     Side and back.                                          to Back Panel and Floor.          Panel

5) Fasten Hinges     6) Fasten Roof and Hinges             7) Fasten Shutter Hooks              8) Mount Nestbox with Large
    to Roof with              to Back Panel.                              to Roof and Sides with              Screws at appropriate Height
      Small Screws.                                                              Round-head Screws.               (see specific species mounting
                                                                                                                                    height and habitat.)