Bird Houses       Martin Houses

Duncraft       The Bird Shed        Bird Baths       Garden Fountains       Outdoor Decor       Nature Shop      Garden      Find Books

Snow Bunting

The Snow Bunting Nestbox is constructed with Red Cedar.  Wood stock is rough-cut on both sides so birds can grip interior and exterior surfaces.

It has a 5" by 5" floor, 8" inside ceiling, 1 3/4" diameter entrance hole located 6" below the roof and ventilation openings in the floor and under the roof.

Hinged roof provides easy access for monitoring and cleaning.  Shutter hooks secure roof in closed position.  Pilot holes in both primary and secondary work pieces makes for easy assembly with screwdriver in minutes.

Mount on a post or the wall of a house or shed.  Remove the nest after the brood rearing seasons are over.

Snow Bunting

Assembly:

Safety First

Assemble woodworking projects in a safe area.on a work bench at a height between waist and chest.

Wear eye protection.  Eye injuries are the most common assembly mishap.

Keep hardware and tools away from children.and infants; store away when not in use.

1) Fasten Right Side to       2) Fasten Floor to Right                              3) Fasten Left Side                   4) Fasten Front.
    Back Panel with screws.     Side and back.                                          to Back Panel and Floor.          Panel

5) Fasten Hinges     6) Fasten Roof and Hinges             7) Fasten Shutter Hooks              8) Mount Nestbox with Large
    to Roof with              to Back Panel.                              to Roof and Sides with              Screws at appropriate Height
      Small Screws.                                                              Round-head Screws.               (see specific species mounting
                                                                                                                                    height and habitat.)

Plans