The Ash-throated Flycatcher nest box is
constructed with Red Cedar. Wood stock is rough-cut on both sides so birds can grip
interior and exterior surfaces.
It has a 6" by 6" floor,
9" inside ceiling, 1 1/2" diameter entrance hole located 7" above the
floor. Ventilation openings are in the floor and under the roof.
Hinged roof provides easy access for
monitoring and cleaning. Shutter hooks secure roof in closed position.
Assembled with corrosion resistant
screws. Pilot holes in both primary and secondary work pieces makes for easy
assembly with screwdriver in minutes.
Mount on tree or post in a secluded
area in the woods between four and ten feet high with partial sun and shade. Remove the
nest after the brood rearing seasons are over. Resources
|
