The Great-crested Flycatcher
nest box is
constructed with Red Cedar. Wood stock is rough-cut on both sides so birds can grip
interior and exterior surfaces.
It has a 6" by 6" floor,
9" inside ceiling, 1 3/4" diameter entrance hole located 7" above the floor
and ventilation openings in the floor and under the roof.
The hinged roof provides easy access
for monitoring and cleaning. Shutter hooks secure roof in closed position.
Pilot holes in both primary and secondary work pieces makes for easy assembly in minutes.
Mount on tree or post in a secluded
area in the woods between six and ten feet high with partial sun and shade. Remove the
nest after the brood rearing seasons are over.
Chickadees, Nuthatches, Titmice,
Wrens, Tree and Violet Green Swallows may use this nest box.
House Sparrows are attracted to bird
houses with entrance holes of the size in this model.
Assembly instructions and plans below.
Resources |
